Kia Optima: Removal
1. |
Disconnect the battery negative
cable, and wait for at least three minutes before beginning work. |
2. |
To remove the seat belt anchor
pretensioner (C), keep on pushing the lock pin (A) as arrow direction. And
then remove the seat belt after pushing the lock pin (B).
|
3. |
Remove the door scuff trim. (Refer
to the Body group- Interior trim) |
4. |
Remove the center pillar trim.
(Refer to the Body group- Interior trim) |
5. |
Disconnect the anchor pretensioner
connector (C).
|
6. |
Loosen the anchor pretensioner
mounting bolt and remove the anchor pretensioner. |
1.
Remove ignition key from the
vehicle.
2.
Disconnect the negative (-) cable
from battery and wait for at least three minutes.
3.
Install the ancho ...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the connector (A), and then remove the
sensor (B).
...
Antenna. Repair procedures
Inspection
Glass Antenna Test
1.
Wrap aluminum foil (A) around
the tip of the tester probe (B) as shown.
2.
Touch one tester probe to the
glass antenna termin ...
Rear Seat. Repair procedures
Replacement
Seat Assembly Replacement
1.
Remove the rear seat cushion
(A).
2.
Disconnect the rear seat heater
connectors (A).
3.
After ...