Kia Optima: Removal
| 1. |
Disconnect the battery negative
cable, and wait for at least three minutes before beginning work. |
| 2. |
To remove the seat belt anchor
pretensioner (C), keep on pushing the lock pin (A) as arrow direction. And
then remove the seat belt after pushing the lock pin (B).
|
| 3. |
Remove the door scuff trim. (Refer
to the Body group- Interior trim) |
| 4. |
Remove the center pillar trim.
(Refer to the Body group- Interior trim) |
| 5. |
Remove the upper anchor bolt. |
| 6. |
Disconnect the seat belt pretensioner
connector (A).
|
| 7. |
Loosen the seat belt pretensioner
mounting bolts (B, C) and remove the seat belt pretensioner. |
1.
Remove the ignition key from
the vehicle.
2.
Disconnect the battery negative
cable and wait for at least three minutes.
3.
Install the seat belt ...
See also:
Precautions
✽ NOTICE
The transmitter (or smart key) will not work if any of following occurs:
The ignition key is in the ignition switch.
You exceed the operating distance limit (about 30 m [90 feet ...
Check spark plugs and ignition
system
Inspect your spark plugs as described in
section 7 and replace them if necessary.
Also check all ignition wiring and components
to be sure they are not cracked,
worn or damaged in any way. ...
Chassis and body
Chart symbols:
I- Inspect these items and their related parts. If necessary, correct, clean,
refill, adjust or replace.
R- Replace or change
L- Lubricate.
(1) Refer to the lubricant a ...
Installation