Kia Optima: Removal
| 1. |
Disconnect the battery negative
cable and wait for at least three minutes before beginning work. |
| 2. |
Remove the glove box housing.
(Refer to the Body group- crash pad). |
| 3. |
Disconnect the passenger airbag
connector (A) and remove the PAB mounting bolts (B).
|
| 4. |
Remove the crash pad. (Refer
to the Body group- crash pad).
|
If the PAB has been deployed, replace the damaged crash pad. |
|
| 5. |
Remove the heater duct from the
crash pad. |
| 6. |
Remove the mounting bolts from
the crash pad. And then remove the passenger airbag.
|
The removed airbag module should be stored in a clean, dry place
with the airbag cushion up. |
|
1.
Remove the ignition key from
the vehicle.
2.
Disconnect the battery negative
cable from battery and wait for at least three minutes before beginning
work.
...
See also:
Chart 2
...
Checking the coolant level
WARNING
Removing radiator
cap
Never attempt to remove the radiator
cap while the engine is operating
or hot. Doing so might lead
to cooling system and engine
damage. Also, hot ...
Outside rearview mirror
Be sure to adjust mirror angles before driving.
Your vehicle is equipped with both lefthand and right-hand outside rearview mirrors.
The mirrors can be adjusted remotely with the remote switch. The ...
Installation