1. | Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
2. | Remove the front passenger seat
assembly. (Refer to the Body group - Seat) |
3. | Remove the OCS assembly. (Refer to the Body group - Seat) |
Precautions For Catalytic Converter
If a large amount of unburned gasoline flows into the converter, it
may overheat and create a fire hazard. To prevent this observe th ...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
Installation
1.
Install the fob holder.
2.
Install the glove box.
...