Kia Optima: Removal
1. |
Remove the ignition key from
the vehicle. |
2. |
Disconnect the battery negative
cable and wait for at least three minutes before beginning work. |
3. |
Remove the floor console. (Refer
to the Body group - console) |
4. |
Pull up the lock (C), of the
SRSCM connector, the disconnect the connector (A and B).
|
5. |
Remove the SRSCM mounting nuts
from the SRSCM, then remove the SRSCM. |
1.
Remove the ignition key from
the vehicle.
2.
Disconnect the battery negative
cable and wait for at least three minutes before beginning work.
3.
In ...
See also:
Installation
1.
Install the seat heater switch.
2.
Install the power window switch.
3.
Install the rear door trim.
...
Installation
1.
Install the wiper motor.
2.
Install the crank arm.
Tighting torque:24.5 ~
26.4Nm (2.5 ~ 2.7, kgf.m, 18.0 ~ 19.5 lbf.ft)
...
Removal
1.
Disconnect the battery negative
cable, and wait for at least three minutes before beginning work.
2.
Remove the front passenger seat
assembly.(Refer to the Body gr ...