Kia Optima: Removal
Shift Lever Assembly Replacement |
1. |
Remove the center console assembly.
(Refer to "Interior(console)" in BD group.) |
2. |
Disconnect sports mode connector
(A).
|
3. |
Remove the shift cable (B).
|
4. |
Remove the shift lever assembly
(B) by removing the bolts (A-4ea).
Tightening torque:9.8 ~
14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.9 lb-ft)
|
|
5. |
Installation is the reverse of
removal.
Make sure vehicle does not roll before setting room side shift lever
and T/M side manual control lever to "N" position. |
|
Control Cable Replacement
1. |
Remove the center console assembly.
(Refer to "Interior(console)" in BD group.) |
2. |
Remove the control cable (B).
|
3. |
Remove the control cable assembly
in the vehicle after removing the nuts (B) and the retainer (A).
Tightening torque:9.8 ~
14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.9 lb-ft)
|
|
5. |
Remove the cable (B) from the
bracket (A) at transaxle assembly side (Refer to "Automatic Transaxle" in
this group).
|
6. |
Remove the control cable inside
of cab. |
1.
Installation is the reverse of
removal.
Make sure vehicle does not roll before setting room sid ...
See also:
Removal
1.
Remove the front wheel and tire.
Tightening torque:88.3
~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the front wheel spee ...
Description
Automatic transaxle system relies on various measurement data to determine the current
control status and extrapolate the necessary compensation values. These values are
used to control the actuat ...
Inspection
1.
Press the MODE switch more then
4 times within 2 seconds while pressing the OFF switch.
Display
Fail description
00
...