Kia Optima: Removal - 26 Brake Control Solenoid Valve(26/B_VFS). Repair procedures - Automatic Transaxle Control System - Automatic Transaxle System - Kia Optima TF 2011-2024 Service ManualKia Optima: Removal

Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraulic pressure will need to be adjusted after replacing the VFS solenoid valve. If replacing the VFS solenoid valve; also replace the valve body assembly. (Refer to "Valve Body" in this group)

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between sensor signal terminal and sensor g ...

Line Pressure Control Solenoid Vale. Description and Operation
Description Line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line pressure. ...

See also:

Weight Classification System (WCS). Components and Components Location
Components ...

Emergency Roadside Assistance
Kia has set up a network of over 17,000 roadside assistance providers. Should you accidentally run out of fuel, require a battery jump, or need help changing a tire, a Kia Consumer Assistance Repr ...

Outside Rearview Mirrors
Be sure to adjust mirror angles before driving. WARNING - Convex Mirror • The right outside rearview mirror is convex. Objects seen in the mirror are closer than they appear. When changing la ...

Copyright © www.kiopman.com 2024