Kia Optima: Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pressure will need
to be adjusted after replacing the VFS solenoid valve. If replacing the
VFS solenoid valve; also replace the valve body assembly. (Refer to "Valve
Body" in this group) |
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature
sensor connector.
3.
Measure resistance between sensor
signal terminal and sensor g ...
Description
26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable
force solenoid valve directly controls the hydraulic pressure inside the 26 brake.
...
See also:
Line Pressure Control Solenoid Vale. Schematic Diagrams
Circuit Diagram
...
Rear Seat Armrest
This armrest is located in the center of the rear seatback. Pull the armrest
down using the strap provided on the armrest.
To open the armrest cover, press the button on the top of the cover and ...
Inspection
1.
Check the hub for cracks and
the splines for wear.
2.
Check the brake disc for scoring
and damage.
3.
Check the knuckle for cracks
4. ...