Kia Optima: Removal
2. |
Disconnect the fuel filler hose (A). |
3. |
Disconnect the ventilation hose (B) from the fuel
tank air filter.
|
4. |
Open the fuel filler door and then remove the filler-neck
installation screw (A).
|
5. |
Remove the rear-LH wheel, tire, and the inner wheel
house. |
6. |
Remove the filler-neck assembly from the vehicle
after removing the bracket installation bolt (A).
|
1.
Installation is reverse of removal.
Filler-neck assembly bracket installation
bolt :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3
lb-ft)
Filler-neck as ...
See also:
TCM Terminal Input/ Output Signal
Connector [CHTG-AG]
Pin
Description
Condition
Input/output value
Type
Level
1
-
...
Adjustment
Adjusting method for T/M control cable
1.
Make sure vehicle does not roll
before setting room side shift lever and T/M side manual control lever to
"N" pos ...
Turn Signals
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down. Green arrow indicators on the instrument
panel indicate which turn signal ...