Kia Optima: Removal
| 1. | Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
| 2. | Lift the vehicle. |
| 3. | Disconnect the canister close valve connector (A). |
| 4. | Disconnect the ventilation hose (B). |
| 5. |
Remove the fuel tank air filter after removing 2
bolts (C).
|
| 6. |
Release the lever (A) and then rotate the canister
close valve (B) in the direction of the arrow in figure.
|
| 7. |
Remove CCV from the fuel tank air filter after coinciding
installation parts (A,B).
|
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and
2.
4.
...
Installation
•
Install the component with the specified
torques.
•
Note that internal damag ...
See also:
Removal
1.
Turn the ignition switch OFF.
2.
Remove the air duct (B) and air
cleaner assembly (A).
3.
Remove the ECM connector (B)
and the arrange the ...
Defogging logic
To reduce the probability of fogging up inside of the windshield, the air intake
or air conditioning are controlled automatically according to certain conditions
such as or
position. To cancel ...
General Safety Information and Caution
Precautions
General Precautions
Please read the following precautions carefully before performing the airbag system
service.
Observe the instructions described in this manual, or the ...
Copyright © www.kiopman.com 2024