Kia Optima: Removal
| 1. | Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
| 2. |
Disconnect the EWGA connector (A).
|
| 3. |
Remove the shaft link assembly (B) after removing
the C-ring (A).
|
| 4. |
Remove the EWGA after removing the bolts (A).
|
Inspection
[Motor]
1.
Turn ignition switch OFF.
2.
Disconnect the EWGA connector.
3.
Check that the EWGA is stuck by foreign material.
...
Installation
1.
Installation is the reverse order of removal.
...
See also:
Components (2)
1. Backing plate
2. Operating lever
3. Upper spring
4. Lower spring
5. Adjuster
6. Shoe hold down spring
7. Shoe hold down pin
8. Shoe
...
Engine compartment
2.4L Engine
2.0L Engine
1. Engine coolant reservoir 2. Engine oil filler cap 3. Brake/clutch* fluid
reservoir 4. Air cleaner 5. Fuse box 6. Positive battery terminal 7. Negative
battery term ...
A/C Pressure Transducer. Description and Operation
Description
A/C pressure transducer convert the pressure value of high pressure line into voltage
value after measure it. By converted voltage value, engine ECU controls cooling
fan by operating ...
Copyright © www.kiopman.com 2024