Kia Optima: Removal
1. |
Turn the ignition switch OFF and disconnect the battery
negative (-) cable. |
3. |
Disconnect the CVVT oil control valve connector (B). |
4. |
Remove the installation bolt (C), and then remove
the valve from the engine.
|
1. |
Turn the ignition switch OFF and disconnect the battery
negative (-) cable. |
2. |
Disconnect the CVVT oil control valve connector (A). |
3. |
Remove the installation bolt (B), and then remove
the valve from the engine.
|
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV terminals 1 and
2.
4.
...
•
Install the component with the specified
torques.
•
Note that internal damag ...
See also:
Description
The Rain sensing windshield wiper system is a wiper system that, in addition to
providing normal wiper functions off, mist, manual low speed, manual high speed,
and wash, provides automatic contro ...
Ignition Switch and Anti-Theft Steering Column Lock
Ignition Switch Positions
LOCK
The steering wheel locks to protect against theft. The ignition key can be removed
only in the LOCK position. When turning the ignition switch o the LOCK position, ...
Manual Transaxle Operation
The manual transaxle has five forward gears. Press the clutch pedal down fully
while shifting, then release it slowly.
A special safety feature prevents inadvertent shifting from 5 (Fifth) to R ( ...