Kia Optima: Removal
| 1. | Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
| 2. | Disconnect the purge control solenoid valve connector (A). |
| 3. |
Disconnect the vapor hoses (B) from the purge control
solenoid valve.
|
| 4. |
Remove the valve from the bracket in the direction
of the arrow.
|
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and
2.
4.
...
Installation
•
Install the component with the specified
torques.
•
Note that internal damag ...
See also:
Components(Without EPB)
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Inner pad shim
6. Brake pad
7. Pad retainer
...
Disarmed stage
The alarm will be deactivated when:
The “” button on the transmitter
is pressed.
The ignition switch is in the “ON” position for 30 seconds or more.
Unlock or lock the doors with the transm ...
Removal
1.
Disconnect the battery negative
cable and wait for at least three minutes before beginning work.
2.
Remove the glove box housing.
(Refer to the Body group- crash p ...
Copyright © www.kiopman.com 2024