Kia Optima: Removal
| 1. | Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
| 2. |
Remove the fuel pump service cover (A) in the trunk.
|
| 3. |
Disconnect the fuel tank pressure sensor connector
(A), and then remove the fuel tank pressure sensor.
|
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
Refer to "Specification"
...
Installation
•
Install the component with the specified
torques.
•
Note that internal damag ...
See also:
Removal
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the glove box.(Refer
to the BD group - "Crash pad")
3.
Disconnect the fob hold ...
Warning / Caution Label Locations
1. Radiator cap caution
2. Fan caution
3. Battery caution
...
Inspection
1.
Check the hub for cracks and
the splines for wear.
2.
Check the brake disc for scoring
and damage.
3.
Check the knuckle for cracks
4. ...
Copyright © www.kiopman.com 2024