Kia Optima: Removal

Inspection

1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T ...

Installation

Refer to "Accelerator Pedal" in this group. ...

See also:

Power Window Motor. Schematic Diagrams
Circuit Diagram ...

License Plate Light Bulb Replacement
1. Using a Phillips screwdriver, remove the two (2) lens mounting screws and the lens. 2. Rotate socket one-quarter turn counterclockwise and carefully pull the socket from the housing. 3. Car ...

Components and Components Location
Component Location 1. Start Stop Button(SSB) 2. FOB key holder 3. FOB key 4. Trunk lid open switch 5. Smart key unit 6. RF receiver 7. Body control module ...