Kia Optima: Reassembly
1. |
Install the hub bearing to the
knuckle assembly.
(1) |
Lay the knuckle assembly
(A) on press. |
(2) |
Lay a new hub bearing
upon the knuckle assembly (A). |
(3) |
Lay a suitable adapter
(B) upon the hub bearing. |
(4) |
Install the hub bearing
to the knuckle assembly by using press. |
-
|
Do not press
against the inner race of the hub bearing because that can
cause damage to the bearing assembly. |
-
|
Always use a
new wheel bearing assembly. |
|
|
2. |
Install the hub assembly to the
knuckle assembly.
(1) |
Lay the hub assembly
(A) upon a suitable adapter . |
(2) |
Lay the knuckle assembly
(B) upon the hub assembly (A). |
(3) |
Lay a suitable adapter
(C) upon the hub bearing. |
(4) |
Install the hub assembly
(A) to the knuckle assembly (B) by using press. |
Do not press against the inner race of the hub bearing because that
can cause damage to the bearing assembly. |
|
3. |
Install the snap ring (A).
|
1.
Remove the snap ring (A).
2.
Remove the hub assembly from
the knuckle assembly.
(1)
Install the front knuckle
assembly (A) on press.
...
See also:
Removal
In case of removing the high pressure fuel pump,
high pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by ...
Smart key precautions
✽ NOTICE
If, for some reason, you happen to lose your smart key, you will not be
able to start the engine. Tow the vehicle, if necessary, and contact an authorized
Kia dealer.
A max ...
Engine Coolant Temperature Sensor (ECTS). Schematic Diagrams
Circuit Diagram
...