Kia Optima: Rear Stabilizer Bar. Repair procedures

Inspection

1. Check the bushing for wear and deterioration. 2. Check the rear lower arm for deformation. 3. Check the coil spring and spring pad for deterior ...

Replacement

1. Remove the rear wheel & tire. Tightening torque:88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

See also:

Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. Visually check for a collapsed vapor hose or hose leaks. 2. ...

Mode Selection
Controls the direction of air flow through the ventilation system. The air from outlet port flows at any mode. Close the ventilation outlets using the knob to block the air flow if you do not wan ...

Balance Shaft & Oil Pump. Repair procedures
...