When the rear seatback lock lever (located on the backside of the rear seatback) is in the “LOCK” position, it is not possible to fold the rear seatback down by using the release lock lever. Should this happen, open the trunk and move the lock lever to the “FREE” position and use the release lock lever located on the top of he seatback to fold the rear seatback down. The rear seatback lock lever is designed to provide protection from unauthorized entry into the trunk.
Disassembly
Universal joint assembly
1.
Loosen the bolt (A) and then
disconnect the universal joint assembly from the steering column assembly.
2.
Reassembly is the reverse of ...
Receiver-Drier. Repair procedures
Replacement
1.
Remove the condenser, and then
remove the bottom cap (B) with L wrench (A) from the condenser.
Tightening torque :20~25N.m
(2.0~2.5kgf.m, 14.5~18.2lb-ft) ...
Seat Belt Pretensioner (BPT). Description and Operation
Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH).
When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt helps to ...