1. Using a cross-tip screwdriver, remove the cover.
2. Turn the bulb socket counterclock-wise and remove it from the housing.
3. Push the bulb in, then rotate it one quarter turn counterclockwise and remove
the bulb from the socket.
4. Insert a new bulb in the socket, then push the bulb in and rotate it one quarter
turn clockwise to lock the bulb in place.
5. Re-install the bulb socket into the rear combination light assembly and rotate
it onequarter turn clockwise to lock the socket in place.
6. Re-install the cover.
Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Specifications
Specifications
Direct control VFS[35R/C]▷ Control type : Normal low type
Control Pressure kpa(kgf/cm², psi)
500.14~9.81(5.1~0.1,72.54~1.42)
Curren ...
Schedule 1 - Severe Maintenance
I: Inspect and, if necessary, adjust, correct, clean or replace.
R: Replace or change. ...
Engine compartment
2.4L Engine
2.0L Engine
* The actual engine room in the vehicle may differ from the illustration.
1. Engine coolant reservoir
2. Engine oil filler cap
3. Brake/clutch fluid reservoir
...