Kia Optima: Rear Bumper. Repair procedures
Replacement
• |
Use a plastic panel removal
tool to remove interior trim pieces to protect from marring the
surface. |
• |
Put on gloves to protect
your hands. |
• |
Take care not to bend
or scratch the cover and other parts. |
|
1. |
Remove the trunk trim. (Refer
to the BD group - "Trunk Trim")
|
2. |
Disconnect the connector (B),
and then loosen the rear combination lamp mounting nuts. |
3. |
Remove the rear combination lamp
(A).
|
4. |
After loosening the rear bumper
side's mounting clips and screw, then disconnect the side's.
|
5. |
Loosen the trunk inner mounting
bolts.
•
|
Push on hook
in the trunk as below arrow. |
|
|
6. |
Loosen the mounting bolts.
|
7. |
Disconnect the rear bumper main
connector (A).
|
8. |
After loosening the mounting
screw and clip, then remove the rear bumper cover (A).
|
9. |
Installation is the reverse of
removal.
•
|
Replace any damaged
clips. |
•
|
Make sure the
connector is plugged in properly. |
|
|
1. Rear bumper cover
2. Rear reflector
3. Rear bumper lower cover
4. Rear bumper energy absorber
5. Wiring harness
6. Rear bumper beam assembly
...
See also:
Side Airbag (SAB) Module. Description and Operation
Description
The Side Airbags (SAB) are installed inside the front seat and protects the driver
and passenger from danger when side crash occurs. The SRSCM determines deployment
of side airbag by ...
Shift Lock System
For your safety, the Automatic Transaxle has a shift lock system which prevents
shifting the transaxle out of P (Park) unless the brake pedal is depressed.
To shift the transaxle out of P (Park):
...
Removal
1.
Lift the vehicle.
2.
Disconnect the fuel filler hose (A).
3.
Disconnect the ventilation hose (B) from the fuel
tank air filter.
...