Kia Optima: Rail Pressure Sensor (RPS). Description and Operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM can control correct injection amount and timing and adjusts the fuel pressure with the fuel pressure regulator valve if the target pressure and the actual pressure calculated by the RPS output signal are different.
Installation
•
Install the component with the specified
torques.
•
Note that internal damag ...
Rail Pressure Sensor (RPS). Specifications
Specification
...
See also:
Troubleshooting
Troubleshooting
Problem
Possible cause
Solution
Not pairing
Bluetooth device of Car is not discoverable mode
Enter Bluetooth ...
ESC (Electronic stability control)
The Electronic Stability control (ESC) system is designed to stabilize the vehicle
during cornering maneuvers. ESC checks where you are steering and where the vehicle
is actually going. ESC appl ...
Window opening and closing
Type A
The driver’s door has a master power window switch that controls all the windows
in the vehicle.
To open or close a window, press down or pull up the front portion of the corresponding
...
Copyright © www.kiopman.com 2024