Kia Optima: Power Window Relay. Repair procedures
Inspection
Diagnosis With GDS| 1. | It will be able to diagnose defects of power window with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and self diagnosis. |
| 2. | Select model and "BCM". |
| 3. | Select the "SJB" to check. |
| 4. | Select "Current data", if you
will check current data of power window system. It provides input/output
status of SJB.
|
| 5. | If you will check the power door
lock operation forcefully, select "Actuation test".
|
Power Window Switch. Repair procedures
Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Fro ...
See also:
Inspection
1.
Immerse the thermostat in water
and gradually heat the water.
2.
Check the valve opening temperature.
Valve opening temperature:
82 ± 1.5°C (17 ...
Components (With EPB)
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Brake pad
6. Pad retainer
...
Inspection
Room Lamp
1.
Check that the switch operates
properly after disconnecting the room lamp connector (A).
[A type]
[B type]
...
Copyright © www.kiopman.com 2024