Inspection
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the front door trim panel. (Refer to the BD group - "Front door") |
3. | Disconnect the connector and
remove the door mirror switch (A) after removing the screws.
|
4. | Check for continuity between
the terminals in each switch position according to the table. [Power Mirror Switch] [Power folding Mirror Switch]
|
Inspection
1.
Ignition "ON".
2.
Turn on the head lamp switch.
3.
Check for operation. If the aim
of the head lamps changes smoothly when the head lamp leve ...
Roof Trim. Repair procedures
Replacement
Sunvisor Replacement
•
Use a plastic panel removal
tool to remove interior trim pieces to protect from ...
Air cleaner
Filter replacement
It must be replaced when necessary, and
should not be washed.
You can clean the filter when inspecting
the air cleaner element.
Clean the filter by using compressed air. ...