Description
The mode control actuator is located at the heater unit.It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select switch makes the mode control actuator shift in order of vent→ B/L → floor → mix.
Installation
1.
Install the heater control unit.
2.
Install the center fascia panel.
3.
Install the crash pad garnish.
...
Disassembly
1.
Using the special tool (09546-26000),
compress the coil spring (A).
Tightening torque:58.8
~ 68.6N.m(6.0 ~ 7.0kgf.m, 43.4 ~ 50.6lb-ft)
...
Crash Pad. Components and Components Location
Components
1. Main crash pad assembly
2. Side speaker grille [LH]
3. Airbag blanking cover
4. Side speaker grille [RH]
5. Center speaker grille
6. Crash pad side cover [ ...