Component Location
Repair procedures
Inspection
Self Diagnosis With GDSSmart key system defects can be quickly diagnosed with
the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis.
The following thr ...
Inspection
1.
Ignition "OFF"
2.
Disconnect the connector of temperature
control actuator.
3.
Verify that the temperature control
actuator operates to t ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and
IG ON.
Specification:
Refer to " ...