1. | Basically, all measurements in this manual are taken with a tracking gauge. |
2. | When a measuring tape is used, check to be sure there is no elongation, twisting or bending. |
3. | For measuring dimensions, both projected dimensions and actual - measurement dimensions are used in this manual. |
Installation
1.
Reassemble the steering wheel
remote control switch after connecting the connector.
2.
Reassemble the steering wheel.
3.
Reassemble the driver airbag
...
Hazardous Driving Conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud,
sand, or similar hazards, follow these suggestions:
Drive cautiously and allow extra distance for braking.
Avoi ...
Removal
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the front wheel guard
clip(2EA).(Refer to the BD group - "Front bumper")
3.
D ...