Kia Optima: Measuring Actual Dimensions
| 1. | These dimensions indicate the actual linear distance between measurement points, and are used as the reference dimensions when a tracking gauge is used for measurement. |
| 2. | First adjust both probes
to the same length (A=A') before measurement.
|
Dimensions Projected
1.
These are the dimensions
measured when the measurement points are projected from the vehicle's surface,
and are the reference dimensions used for used for body alterations ...
Measurement Point
Measurements should be taken at the center of the hole.
...
See also:
Pre-tensioner Seat Belt
Your vehicle is equipped with driver’s and front passenger’s pre-tensioner seat
belts. The purpose of the pre-tensioner is to make sure that the seat belts fit
tightly against the occupant’s bod ...
Troubleshooting
Trouble Shooting
Ignition System
Symptom
Suspect area
Remedy
Engine will not start or is hard to start (Cranks OK)
Ignition lock switch
...
Engine Mounting. Components and Components Location
1. Transaxle mounting bracket
2. Roll rod bracket
3. Sub frame
4. Engine mounting bracket
5. Engine mounting support bracket
...
Copyright © www.kiopman.com 2024