Kia Optima: MAX A/C MODE
When you select the MAX A/C mode (switch indicator illuminates) while the fan speed is on, it will be set the system automatically as follows;
- the air conditioning system will be turned on.
- the recirculated air position will be selected.
- the face mode will be selected.
If you select the MAX A/C mode, you could not cancel the A/C system and the recirculated air position. Set the fan speed control knob to desired speed and rotate the temperature control knob to the extreme left position.
To turn the MAX A/C mode off, press the MAX A/C mode button again or select the others except face mode.
Air Conditioning Switch
Press the switch to turn the air conditioning system on. An indicator light in
the switch will illuminate when the fan switch is on indicating air conditioning
system operation. Press the switch ...
System Operation
Ventilation
1. Set the mode selection switch to the
position.
2. Set the air intake control switch to the outside air position.
3. Set the temperature control knob to the desired position.
4. Se ...
See also:
Removal
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
3.
...
Traction Control Indicator Lights
The TCS indicator will
illuminate when the ignition key is turned to the “ON” position, but should go off
after 3 seconds. It means the TCS is in the stand-by status and at the moment of
the act ...
Specifications
Item
Specifications
Transmission type
A6LF2
Engine model
Gasoline 2.0 T-GDI
Torque converter type
...