1. Using a Phillips screwdriver, remove the two (2) lens mounting screws and
the lens.
2. Rotate socket one-quarter turn counterclockwise and carefully pull the socket
from the housing.
3. Carefully pull the bulb out of the socket.
4. Insert a new bulb in the socket.
5. Carefully insert the socket into the housing and rotate it one-quarter turn clockwise.
6. Re-install the lens and the two (2) mounting screws.
Connector Terminal Function
1.
Connector terminal
2.
Terminal Function
Housing
Pin
Function
Wire color
...
Removal
1.
Remove the battery and the battery
tray. (Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
Tightening torque:7.8 ~
11 ...
Starting the engine with an ignition key
1. Make sure the parking brake is applied.
2. Manual Transaxle - Depress the clutch pedal fully and shift the transaxle
into Neutral. Keep the clutch pedal and brake pedal depressed while turning t ...