Description
1. | The intake actuator is located at the blower unit. |
2. | It regulates the intake door by signal from control unit. |
3. | Pressing the intake selection switch will shift between recirculation and fresh air modes. |
Change to "winter weight" oil if
necessary
In some climates it is recommended that
a lower viscosity "winter weight" oil be
used during cold weather. See section 8
for recommendations. If you aren't sure
what weight oil y ...
Installation
1.
Install the wiper switch.
2.
Install the steering column upper
and lower shrouds.
...
Removal
Front Speaker
1.
Remove the front door trim panel
and speaker connector.(Refer to the BD group - "Front door")
2.
Remove the front speaker (A)
after loos ...