Circuit Diagram
Installation
1.
Install the overhead console
lamp after connecting the sunroof switch connector and lamp connector.
2.
Install the lens after tightening
2 screws.
...
Inspection
[Motor]
1.
Turn ignition switch OFF.
2.
Disconnect the EWGA connector.
3.
Check that the EWGA is stuck by foreign material.
...
Seat Heater (Non-Air Ventilation). Repair procedures
Inspection
First Seat Heater
1.
Check for continuity and measure
the resistance between No.4 and No.6 terminals.[Cushion]
No.
Description ...