Kia Optima: Installation
| • |
Install the component with the specified
torques. |
| • |
Note that internal damage may occur when
the component is dropped. If the component has been dropped,
inspect before installing.
|
|
| 1. |
Installation is reverse of removal.
Electronic throttle body Installation bolt:9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7
lb-ft)
|
|
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Remove the resonator and the air intake hose (Refer
to “Intake And Exhaust ...
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density
type sensor and is installed on the surge tank. It senses absolute pressure
of the surge tank and transfers the analog si ...
See also:
Removal
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
Disconnect ...
Components and Components Location
Component Location
1. Hood switch
2. Burglar horn
3. BCM and RF antenna
4. Key warning switch
5. Front door switch
6. Front door lock actuator & switch
...
Rear Seat Armrest
This armrest is located in the center of the rear seatback. Pull the armrest
down using the strap provided on the armrest.
To open the armrest cover, press the button on the top of the cover and ...
Removal
Manifold Absolute Pressure Sensor (MAPS). Description and Operation