Kia Optima: Installation
1. |
Apply a light coat of engine
oil to the oil cooler packing surface (A), and then install the oil cooler
with fix bolt (B).
Tightening torque:44.1
~ 53.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~ 39.8 lb-ft)
|
Fix position of oil cooler stopper(A) where oil cooler resists on
ladder frame stopper (B). |
|
2. |
Apply a light coat of engine
oil to the oil filter packing surface (A), and then install the oil filter.
Tightening torque:11.8
~ 15.7 N.m (1.2 ~ 1.6 kgf.m, 8.7 ~ 11.6 lb-ft)
|
|
3. |
Connect the oil cooler coolant
hoses (B).
|
4. |
Fill the radiator with coolant
and check for leaks. |
1.
Loosen the drain plug, and drain
the coolant. Remove the radiator cap to speed draining.
2.
Disconnect the oil cooler coolant
hoses (A).
3.
...
Inspection
1.
Check the continuity between
the terminal and the body with an ohmmeter.If there is no continuity,
replace the oil pressure switch.
2.
Ch ...
See also:
TPMS Receiver. Schematic Diagrams
Circuit Diagram
Connector pin number
Pin NO.
Discription
Remark
1
-
2
-
...
Interior A
Front pillar trim mounting hole (Ø12)
Front pillar trim mounting hole (Ø8.4)
Cowl cross ...
Cluster ionizer. Description and Operation
Description
1.
The function of cluster ion generator
is cleaning air by sterilizing and dissolving of air conditioner.
2.
The function of cluster ion generator
is co ...