Kia Optima: Installation
Parking Assist Sensor
1. |
Connect the connector, and then
install the sensor. |
2. |
Install the rear bumper. |
Buzzer
2. |
Install the BCM and steering
column assembly. |
3. |
Install the crash pad lower panel.
|
RPAS switch
1. |
Install the RPAS switch and crash
pad switch assembly. |
2. |
Connect the negative (-) battery
terminal. |
Parking Assist Sensor
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the rear bumper.(Refer
to the BD group - "Rear bumper")
3.
...
See also:
Installation
1.
Install the power window switch
module.
2.
Install the door trim panel after
reconnecting the relevant connectors
...
Placing a passenger seat belt into the auto lock mode
The auto lock mode will help prevent the normal movement of the child in the
vehicle from causing the seat belt to loosen and compromise the child restraint
system. To secure a child restraint s ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Lift the vehicle.
3.
Disconnect the canister cl ...