1. | Install the high mounted stop lamp to the rear package tray. |
2. | Install the rear package tray trim. |
3. | Install the rear seat. |
Removal
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the glove box.(Refer
to the BD group - "Crash pad")
3.
Disconnect the fob hold ...
Check Fuses
A blade type fuse test taps provided to allow checking the fuse itself without
removing if from the fuse box. The fuse is good if the test lamp lights up when
one lead is connected to the test tap ...
Fuel Filler Door Release Actuator. Repair procedures
Inspection
1.
Remove the trunk room left side
trim.(Refer to the BD group - "Interior trim")
2.
Remove the fuel filler door release
actuator (A) after ...