Kia Optima: Installation
1. |
Install the head lamp bulbs. |
2. |
Connect the connectors. |
3. |
Install the head lamp bolts (2EA). |
4. |
Connect the negative (-) battery
terminal. |
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the front bumper.(Refer
to the BD group - "Front bumper")
3.
Loosening the he ...
<Mechanical aiming>
The head lamps should be aimed with the proper beam-setting equipment, and in accordance
with the equipment manufacturer's instructions.
...
See also:
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature
sensor connector.
3.
Measure resistance between sensor
signal terminal and sensor g ...
Installation
1.
Installation is the reverse of
removal.
•
When installing, apply
the ATF oil or white vasel ...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...