Kia Optima: Installation
1. |
Reassemble the steering wheel
remote control switch after connecting the connector. |
2. |
Reassemble the steering wheel. |
3. |
Reassemble the driver airbag
module.
Make sure the hands free remote control switch and the airbag module
connectors are plugged in properly. |
|
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the driver airbag module.
(Refer to the RT group)
3.
Remove the steering wheel.
(Refe ...
Inspection
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the roof trim.(Refer
to the BD group - "Roof trim")
3.
Remove the ...
See also:
Operation of the rear parking assist system
Operating condition
This system will activate when backing up with the ignition switch ON.
The sensing distance while the rear parking assist system is in operation
is approximately 120 cm (4 ...
Components and Components Location
1. Piston ring
2. Snap ring
3. Piston
4. Connecting rod
5. Connecting rod upper bearing
6. Piston pin
7. Connecting rod lower bearing
8. Connecting ...
Inspection
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the lighting switch of
the multi-function switch. (Refer to the multi-function switch)
3.
Wi ...