Kia Optima: Installation
1. |
Install the washer reservoir.
Before installing the pump motor, check the filter for foreign material
or contamination. if necessary, clean the filter into the pump motor. |
|
2. |
Install the washer motor. |
3. |
Install the washer hose. |
4. |
Connect the washer motor connector
and level sensor connector. |
5. |
Install the front bumper. |
6. |
Check the washer motor operation. |
-
When servicing the washer
pump, be careful not to damage the washer pump seal.
-
Do ...
See also:
Main components of ODS
A detection device located within the front passenger seat track.
Electronic system to determine whether passenger air bag systems should
be activated or deactivated.
A indicator light locat ...
Immobilizer Control Unit. Repair procedures
Replacement
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
...
Owner Maintenance Precautions
Improper or incomplete service may result in problems. This section gives instructions
only for items that are easy to perform.
WARNING - Maintenance Work
You can be seriously injured while p ...