1. | Install the heater control unit. |
2. | Install the center fascia lower panel. |
3. | Install the crash pad garnish. |
Adjustment
Inspect Glass Alignment
1.
Check for abnormal noise or bending
during operation.
2.
With the sunroof fully closed,
check for water leakage.
3.
The roof ...
Checking the Engine Oil Level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait a few minutes for the oil to return to the oil pan. ...
Inspection
1.
Measure the output voltage between
the terminal of the wheel speed sensor and the body ground.
...