1. | Install the power window switch module. |
2. | Install the door trim panel after
reconnecting the relevant connectors
|
System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position. 3. Set the
temperature control to the desired position. 4. Set the fan speed contr ...
Removal
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the front wheel guard
clip(2EA).(Refer to the BD group - "Front bumper")
3.
D ...
Special Service Tools
Special Service Tools
Tool (Number and name)
Illustration
Use
09861-31100
Sealany cut-out tool
Cutting windshield seal ...