Kia Optima: Installation
| - |
Make sure that the IMS
control switch connectors and related connectors are plugged in
properly. |
| - |
Check the IMS control
switch operates normally. |
|
| 1. |
Connect the connectors and reassemble
the IMS control switch. |
| 2. |
Reassemble the seat side cover.
|
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the seat control switch
(A).
3.
Remove the seat side cover (A).
(Refer to the BD ...
See also:
Reassembly
1.
Install the hub bearing to the
knuckle assembly.
(1)
Lay the knuckle assembly
(A) on press.
(2)
Lay a new hub bearing
upon the k ...
Circuit Diagram - ESC (3)
...
Checking the coolant level
WARNING
Removing radiator
cap
Never attempt to remove the radiator
cap while the engine is operating
or hot. Doing so might lead
to cooling system and engine
damage. Also, hot ...
Removal
Seat Heater Switch. Schematic Diagrams