Kia Optima: Installation
1. |
Install the body control module. |
2. |
Install the accelerator. |
3. |
Install the reinforce panel. |
4. |
Install the crash pad lower panel. |
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the crash pad lower panel
(A).
3.
Remove the reinforce panel after
loosening th ...
See also:
26 Brake Control Solenoid Valve(26/B_VFS). Specifications
Specifications
Direct control VFS[26/B]▷ Control type : Normal low type
Control Pressure kpa(kgf/cm², psi)
9.81~500.14(0.1~5.1, 1.42~72.54)
Curren ...
Removal
1.
Remove the following items;
A.
Engine cover.
B.
Air cleaner assembly
and air duct (A). (Refer to "Intake and Exhaust system" in ...
Engine temperature gauge
This gauge shows the temperature of the engine coolant when the ignition switch
is ON.
Do not continue driving with an overheated engine. If your vehicle overheats,
refer to “If the engine over ...