Smart Key Unit
1. | Install the smart key unit. |
2. | Install the smart key unit mounting nuts and bolts and connector. |
3. | Install the glove box housing. |
4. | Install the glove box. |
5. | Install the negative (-) battery terminal and check the smart key system. |
1. | Install the RF receiver. |
2. | Install the glove box housing. |
3. | Install the glove box. |
4. | Install the negative (-) battery terminal and check the smart key system. |
1. | Install the interior 1 antenna. |
2. | Install the heater control unit |
3. | Install the negative (-) battery terminal and check the smart key system. |
1. | Install the interior 2 antenna. |
2. | Install the console rear cover after connecting the connector. |
3. | Install the negative (-) battery terminal and check the smart key system. |
1. | Install the trunk antenna. |
2. | Install the trunk trim. |
3. | Install the negative (-) battery terminal and check the smart key system. |
1. | Install the exterior bumper antenna. |
2. | Install the rear bumper. |
3. | Install the negative (-) battery terminal and check the smart key system. |
1. | Install the buzzer. |
2. | Install the left side wheel guard. |
3. | Install the negative (-) battery terminal and check the smart key system. |
1. | Install the trunk lid open switch. |
2. | Install the trunk trim. |
3. | Install the negative (-) battery terminal and check the smart key system. |
1. | Install the outside handle. |
2. | Install the door trim. |
3. | Install the negative (-) battery terminal and check the smart key system. |
Purge Control Solenoid Valve (PCSV). Specifications
Specification
Item
Specification
Coil Resistance (Ω)
19.0 ~ 22.0 [20°C(68°F)]
...
Installation
Parking Assist Sensor
1.
Connect the connector, and then
install the sensor.
2.
Install the rear bumper.
Buzzer
1.
Install the buzzer.
2.
In ...
Power Window Switch. Repair procedures
Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Fro ...