Kia Optima: Installation
| 1. | Installation is the reverse of removal. |
| 2. | Perform the “Assembly check” with GDS. |
| 3. | Check that the brake operates normally by pushing the EPB switch more than 3 times after installing the EPB module. |
Remove
1.
Turn ignition OFF and disconnect
the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body – “Crash pad”)
3.
Disconnec ...
EPB Switch. Repair procedures
Remove
1.
Turn ignition OFF and disconnect
the negative (-) battery cable.
2.
Remove the floor console upper
cover.(Refer to Body group - "Console")
...
See also:
Front Disc Brake. Components and Components Location
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Inner pad shim
6. Brake pad
7. Pad retainer
...
Component Location (1)
1. Buzzer
2. RF receiver
3. Smart key unit
4. Interior antenna 1
5. Interior antenna 2
6. Trunk antenna
7. Bumper antenna
...
EBD(Electronic Brake-force Distribution). Description and Operation
Operation
The EBD system (Electronic Brake force Distribution) as a sub-system of the ABS
system is to control the maximum braking effectiveness by the rear wheels.
It further utilizes the effic ...
Copyright © www.kiopman.com 2024