Kia Optima: Installation
1. |
Installation is the reverse of
removal. |
2. |
Use a SST (09581-11000) when
installing the brake caliper assembly.
|
3. |
After installation, bleed the
brake system. (Refer to Brake system bleeding) |
• |
Do not hit piston end
by hammer or prying directly against piston face with screwdriver
to push in piston. |
• |
Use wood or a used pad
to protect piston end. Pushing on the wood or used pad is recommended. |
• |
When spreading a piston,
all area of piston end face should be protected from using the SST. |
|
Rear Brake Disc Thickness Check
1.
Check the brake pads for wear
and fade.
2.
Check the brake disc for damage
and cracks.
3.
Remove all rust and contam ...
See also:
Components and Components Location
Components Location
1. Receiver
2. TPMS sensor (FL)
3. TPMS sensor (RL)
4. TPMS sensor (RR)
5. TPMS sensor (FR)
...
The Importance of the Passenger Being Properly Seated
The front seat passenger’s air bag is much larger than the steering wheel air
bag and inflates with considerably more force. It can seriously hurt or kill a passenger
who is not in the proper po ...
Inspection
Brake Booster
1.
Inspect the check valve in the
vacuum hose, intensifier and the connecting section.
...