Kia Optima: Installation
| 1. |
Installation is the reverse of
removal. |
| 2. |
Use a SST (09581-11000) when
installing the brake caliper assembly.
|
| 3. |
After installation, bleed the
brake system. (Refer to Brake system bleeding) |
| • |
Do not hit piston end
by hammer or prying directly against piston face with screwdriver
to push in piston. |
| • |
Use wood or a used pad
to protect piston end. Pushing an the wood or used pad is recommended. |
| • |
When spreading a piston,
all area of piston end face should be protected from using the SST. |
|
Front brake disc thickness check
1.
Check the brake pads for wear
and fade.
2.
Check the brake disc for damage
and cracks.
3.
Remove all rust and conta ...
See also:
Installation
1.
Installation is the reverse of
removal.
If the oil seal on the transaxle case side is damaged and fluid is leakin ...
Windshield Glass. Repair procedures
Replacement
Removal
•
Put on gloves to protect
your hands.
•
Use seat covers to avoid ...
Description
Network ConfigurationThe Network of the SJB(Smart Junction Box) consists of Low
speed CAN as shown in the following figure.
Termination ResistorThe cluster has CAN termination resistor. It is p ...
Inspection