1. | Installation is the reverse of
removal.
|
2. | After installation, bleed the brake system. (Refer to Brake system bleeding) |
3. | Check the spilled brake oil. |
Troubleshooting
Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection ProcedureMeasuring Condition of Electronic Parts' Resistance
The measured resistance at hi ...
Inspection
1.
Check the brake tubes for cracks,
crimps and corrosion.
2.
Check the brake hoses for cracks,
damage and fluid leakage.
3.
Check the brake tube flar ...
Battery recharging
Your vehicle has a maintenance-free,
calcium-based battery.
If the battery becomes discharged in a
short time (because, for example, the
headlights or interior lights were left on
while ...