Kia Optima: Installation
| 1. |
Installation is the reverse of
removal. |
| • |
When installing, apply
the ATF oil or white vaseline to the O-ring (A) not to be damaged.
|
| • |
Continue to apply liquid
gasket at application points at the valve body cover with Ø2.5mm
(0.0984in.) thickness.
Liquid gasket Part
name :
Threebond 1281B or LOCTITE FMD-546
|
|
| • |
Adding automatic transaxle
fluid. (Refer to "Hydraulic system (Fluid)" in this group) |
|
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
Description
Inhibitor Switch monitors the lever's position(PRND) and is used to control gear
setting signals.
...
See also:
Installation
1.
Install the power window switch
module.
2.
Install the door trim panel after
reconnecting the relevant connectors
...
Restraint of Infants and Small Children
To increase their safety, infants and young children should always be restrained
by a restraint system approved for their age and size. for this reason, all states
of The United States have laws g ...
Windshield wiper/washer
A : Wiper speed control
· MIST – Single wipe · OFF – Off · INT – Intermittent wipe AUTO – Auto
control wipe (if equipped) · LO – Low wiper speed · HI – High wiper speed
B : Intermittent or Auto ...
Removal
Inhibitor Switch. Description and Operation