Kia Optima: Installation
| 1. |
Installation is the reverse of
removal. |
|
If the oil seal on the transaxle case side is damaged and fluid is leaking,
replace the oil seal with a new unit. When installing the new oil seal,
use the specialized tool (oil seal installer, 09453-3L240). |
After replacement or reinstallation procedure of the automatic transaxle
assembly, must perform procedures below.
| • |
Adding automatic transaxle
fluid. (Refer to "Hydraulic system (Fluid)" in this group) |
| • |
After servicing the automatic
transaxle or TCM, clear the diagnostic trouble codes (DTC) using
the GDS tool. Diagnostic trouble codes (DTC) cannot be cleared
by disconnecting the battery.
|
| • |
When deleting diagnostic
trouble code, use the GDS as possible. |
| • |
When replacing the automatic
transaxle, reset the automatic transaxle's values by using the GDS.
|
| • |
Perform TCM learning
after replacing the transaxle to prevent slow transaxle response,
jerky acceleration and jerky startup. (Refer to "Automatic transaxle
control system (Repair procedures)" in this group) |
|
1.
Remove the following items;
A.
Engine cover.
B.
Air cleaner assembly
and air duct (A). (Refer to "Intake and Exhaust system" in ...
See also:
Periodic inspection
All seat belts should be inspected periodically for wear or damage of any kind.
Any damaged parts should be replaced as soon as possible. ...
Tire traction
Tire traction can be reduced if you
drive on worn tires, tires that are
improperly inflated or on slippery
road surfaces. Tires should be
replaced when tread wear indicators
appear. Slow dow ...
Camshaft Position Sensor (CMPS). Troubleshooting
Wave Form
...
Removal
Hydraulic System