Kia Optima: Installation - Accelerator Pedal. Repair procedures - Fuel Delivery System - Engine Control/Fuel System - Kia Optima TF 2011-2024 Service ManualKia Optima: Installation

1. Installation is reverse of removal.

Accelerator pedal module installation nut:

9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

Accelerator pedal module installation bolt:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)



Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...

Delivery Pipe. Repair procedures
...

See also:

Recalibrating the sunroof motor
If your battery is disconnected or you manually open the sunroof using the hex head wrench, you have to re-set your sunroof motor as follows : Turn the ignition key to the ON position. Pull th ...

Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the lens trunk trim. (Refer to the BD group - "Trunk") 3. Replace the bulb (A) ...

Inspection
Brake Booster 1. Inspect the check valve in the vacuum hose, intensifier and the connecting section. ...

Copyright © www.kiopman.com 2024